Watch All Paid Channels For Free [New]

Well in the past days to unscramble scrambled channels, you needed to have  “digital TV unscramble box” which is kind top secret gadget and law forbidden! But that was not the end for geeks that now you can do the same thing minus it. And If your decoder has a Usb or memory card slot, your half way there to watching all the channels you always yarned for free of charge and all the channels that were previously marked with $, € or £ will be available.

And how does this work?

Well you will use a modified software update file which has a virus called Direct Action Virus(DAV) and it is this virus that changes the $ sign to 0 , tricking your decoder to read the premium/paid  channels as Free!! 

And this virus does not affect your decoder in any way so you just have to click "Restore" to get everything back to normal.

And if you still doubt, Check out this article!

A direct action virus doesn’t install itself or remain hidden in your computer’s memory. But instead attaches itself to a particular type of file (typically EXE or COM files). That when someone executes the file, it springs into life, looking for other similar files in the directory for it to spread to. And on a positive note, the virus does not typically delete files nor hinder your system’s performance. https://www.makeuseof.com/tag/types-computer-viruses-watch 

Now because you know how it works let's go ahead and see the pros and cons of this starting with the;

#pros:

• You will watch all the channels for free for life time!!

• No one will know about your hack!!

• You can always change back to your so called normal Decoder!!

• And most importantly, since your here you will not have to pay anyone for the firmware not even  us as we are providing it free for Download!!

#cons

• The concerned may know of your hack when you tell them about it!!

• In case of power disruptions or mis-following of instructions, your lovely Decoder may fail to reboot or brick!!

⚠️Remember that we are not responsible for any resultant problems, see our disclaimer in the menu at the top.

But don't you think Edison would haven't

invented electricity if he didn't take risks?

Well if yes, So Just make sure to follow well and the process just takes a maximum of 10 minutes to finish. So let's start •••>

MAKE SURE YOU HAVE:

✅ A decoder with a USB port or the memory card slot plus a USB drive or memory card and are well functioning.

✅ Buy the DTB firmware,  link at the end of this post and though we used to give it for free, we run out of resources so now we charge a few bucks for it. 

STEPS

✅ insert the memory card or flash drive with the .bin file on your decoder and turn it ON...

✅ go to settings...

✅ go to upgrade and select it and choose the usb option. confirm? Yes✓

✅ the upgrade process will begin and after a few minutes it will be done...

✅ switch off and on the decoder now (reboot...)

NOTE; If a 'no match file' error appears, make sure that you only copy the .bin file into the flash drive. Or cross check that the ports or the drive work well!

And if any error message pops up while updating just don't press " ok " but instead go to the bottom of your screen and you will see an instruction to download from the .bin file, so click that and a separate file named " flashfile.bin " probably 8.1 mbs will be created automatically and you will use this to hack or update successfully!!

And please if you purchase the software from us and face any problems feel free to contact us, we're at your disposal always! 

And in case your Decoder does not have a USB port or it has no update from USB option then it can be unlocked remotely with only a few increment of the initial cost. [ see the buy software link below ] 

Buy Firmware Here